Aqua-EZ-Flo Water Bottle Dispenser and Pump System Installation for RV, Home, Office

Installation

The compact Flojet dispenser system is simple to hook up and maintain

	Place bottled water container in a convenient spot
	Mount the 5.5" X 7.5" Flojet system in an available location
	Insert the suction wand into the bottle
	Install optional faucet and fittings to sink
	Insert tubing into the connector fitting (20 feet are included)
	Route tubing to your refrigerator or water tap
	Plug into electrical outlet
	Turn switch on

How the system works.

The FLOJET Bottled Water Dispensing System is designed to pump water from commercially available 3, 5, or 6 gallon water bottles. The system delivers the bottled water under pressure to a sink mounted drinking water faucet, or to the water inlet of a refrigerator icemaker, coffee brewer, or other water tap.

When the suction wand is inserted into the water bottle, it activates the float switch on the end of the wand and turns on the pump. This same float switch shuts off the system when the bottle is empty. The wand has a built in back-flow valve that prevents water in the system from flowing back into the bottle, or spilling while changing bottles.

The dispenser system's pump module automatically adjusts the flow and pressure to fill an icemaker or dispense chilled water from a refrigerator door tap, and stops when the icemaker is full or the water valve is closed.

Now you can have an affordable, ready-to-use Bottled Water Dispenser and Pump System for home, office, RV, and boats.